A B C D E F G H I K L M N O P R S T U V W X Z

I

IAPP_Register - Static variable in class AV.Service_Type

IAPP-Register = 15.

IDENTITY - Static variable in class EAPInfo

Default packet type if EAP-Start packet sent (0).

IDSL - Static variable in class AV.NAS_Port_Type

For NAS-Port-Type: IDSL - ISDN Digital Subscriber Line = 14.

IF_Netmask - Static variable in class A

IF-Netmask (153).

INTEGER - Static variable in class AttributeDataType

The attribute is probably an integer - 1.

INTEGER - Static variable in class RADIUSDictionary

The attribute is probably an integer - 1.

IPADDRESS - Static variable in class AttributeDataType

The attribute is probably an IP Address (v4 or V6) - 16.

IPADDRESS - Static variable in class RADIUSDictionary

The attribute is probably an IP Address (v4 or V6) - 16.

IPX - Static variable in class AV.Framed_Compression

For Framed-Compression: IPX header compression = 2.

IPX - Static variable in class AV.Tunnel_Medium_Type

IPX = 11.

IPX_Alias - Static variable in class A

IPX-Alias (224).

IPX_Node_Addr - Static variable in class A

IPX-Node-Addr (182).

IPX_Peer_Mode - Static variable in class A

IPX-Peer-Mode (216).

IPX_Route - Static variable in class A

IPX-Route (174).

IP_Address_Allocate - Static variable in class PacketType

IP Address Allocate packet type, value = 50.

IP_Address_Release - Static variable in class PacketType

IP Address Release packet type, value = 51.

IP_Direct - Static variable in class A

IP-Direct (209).

IP_IP - Static variable in class AV.Tunnel_Type

IP-in-IP Encapsulation (IP-IP) [6]

IP_Pool_Definition - Static variable in class A

IP-Pool-Definition (217).

IP_in_IP - Static variable in class AV.Tunnel_Type

IP-in-IP Tunneling [10]

IPv4 - Static variable in class AV.Tunnel_Medium_Type

IPv4 (IP version 4) = 1.

IPv6 - Static variable in class AV.Tunnel_Medium_Type

IPv6 (IP version 6) = 2.

ISDN_Async_V110 - Static variable in class AV.NAS_Port_Type

For NAS-Port-Type: ISDN Async V.110 = 4.

ISDN_Async_V120 - Static variable in class AV.NAS_Port_Type

For NAS-Port-Type: ISDN Async V.120 = 3.

ISDN_Sync - Static variable in class AV.NAS_Port_Type

For NAS-Port-Type: ISDN Sync = 2.

Idle_Limit - Static variable in class A

Idle-Limit (244).

Idle_Timeout - Static variable in class A

Idle-Timeout (28).

Idle_Timeout - Static variable in class AV.Acct_Terminate_Cause

For Acct-Terminate-Cause: Idle Timeout = 4.

Inc_Channel_Count - Static variable in class A

Inc-Channel-Count (236).

Inclusively - Static variable in class AV.ARAP_Zone_Access

For ARAP-Zone-Access: Use zone filter inclusively = 2.

IntMap - class IntMap.

Class to map primitive integers (int) to objects.

IntMap() - Constructor for class IntMap

Default constructor.

IntMap(int) - Constructor for class IntMap

Constructor to set the initial capacity.

Interim_Accounting - Static variable in class PacketType

Interim Accounting packet type, value = 6.

Interim_Update - Static variable in class AV.Acct_Status_Type

For Acct-Status-Type: Interim-Update = 3.

Invalid_EAP_Packet - Static variable in class AV.Error_Cause

Invalid EAP Packet = 202.

Invalid_Request - Static variable in class AV.Error_Cause

Invalid Request = 404.

identifier - Variable in class EAPState

EAP Packet Identifier used to track requests and responses.

includedLength - Variable in class SnoopRecord

32-bit unsigned integer representing the length of the Packet Data field.

incoming_req_uri - Static variable in class Cisco

initialize(Subject, CallbackHandler, Map, Map) - Method in class RADIUSLogin

Initialize a few things.

isAccessChallengeResponse() - Method in class AuthInfo

Determine if this is a response to an Access-Challenge.

isAccessRequest() - Method in class AuthInfo

Determine if this is an answer to an Access-Request.

isEAPProtocol(int) - Method in class EAPPacket

Determine if this is an expected EAP type packet.

isEAPStart() - Method in class EAPPacket

Determine if this is an EAP-Start packet.

isEAPTLS() - Method in class EAPPacket

Determine if this is an EAP-TLS packet.

isEmpty() - Method in class IntMap

Returns true if the tableis empty.

isFailure() - Method in class EAPPacket

Determine if this packet is a failure response.

isIdentity() - Method in class EAPPacket

Determine if this packet is an identity packet.

isInNetwork(InetAddress, InetAddress) - Method in class NASInfo

Filter based on net work mask.

isLongTag() - Method in class Attribute

Determine if this attribute has a long tag (16 bit).

isNAK() - Method in class EAPPacket

Determine if this packet type is a NAK.

isOpen - Variable in class LogImpl

Has open been called?

isPrintable() - Method in class Attribute

Determine if this attribute's data is printable (UTF-8).

isPrintable(byte[]) - Static method in class Attribute

Determine if a byte array is printable (UTF-8).

isPrintable(byte[], int, int) - Static method in class Attribute

Determine if a byte array is printable (UTF-8).

isPrintableAscii() - Method in class Attribute

Determine if this attribute's data is printable (eg ASCII-printable).

isPrintableAscii(byte[]) - Static method in class Attribute

Determine if a byte array is printable (eg ASCII-printable).

isPrintableAscii(byte[], int, int) - Static method in class Attribute

Determine if a byte array is printable (eg ASCII-printable).

isReady() - Method in class Attributes

Determine if the values in the callback class are ready to be accessed or modified.

isReady() - Method in interface RADIUSCallback

Determine if the data in the callback is ready to be written or read.

isReady() - Method in class RADIUSConfirmationCallback

Determine if the values in the callback class are ready to be accessed or modified.

isReady() - Method in class RADIUSLanguageCallback

Determine if the values in the callback class are ready to be accessed or modified.

isReady() - Method in class RADIUSNameCallback

Determine if the values in the callback class are ready to be accessed or modified.

isReady() - Method in class RADIUSPasswordCallback

Determine if the values in the callback class are ready to be accessed or modified.

isReady() - Method in class RADIUSTextInputCallback

Determine if the values in the callback class are ready to be accessed or modified.

isReady() - Method in class RADIUSTextOutputCallback

Determine if the values in the callback class are ready to be accessed or modified.

isRecursing(String) - Static method in class StackTrace

Check for recursion of the named method.

isRequest() - Method in class EAPPacket

Determine if the packet is a request.

isResponse() - Method in class EAPPacket

Determine if the packet is a response.

isSuccess() - Method in class EAPPacket

Determine if this packet is a success response.

isTunnel(int) - Method in class RADIUSDictionary

Determine if this attribute is a tunnel attribute.

isTunnel(int, int) - Method in class RADIUSDictionary

Determine if this attribute is a tunnel attribute.

isTunnelAttribute() - Method in class Attribute

Determine if this is a tunnel attribute.

isVSA(int) - Method in class RADIUSDictionary

Determine if this attribute is a Vendor-Specific attribute (VSA).

isVSA(String) - Method in class RADIUSDictionary

Determine if this attribute is a Vendor-Specific attribute (VSA).